Flange bearings with 2 mounting holes, EFOI, igubal®, spherical ball iglide® R

igubal® flange bearings
 
igubal® flange bearings have been developed for supporting the centre or ends of shafts.
 
The housing is made from igumid G, an extremely impact-resistant, long-fiber-reinforced polymer. Suitable for temperatures from -30 °C to +80 °C in long-term use.
 
Here, the spherical ball is manufactured from iglide® R, which is a low-cost material with low coefficients of friction and good wear resistance at low to medium loads.

• Easy installation
• Compensation of misalignment errors
• Absolutely corrosion-resistant
• Very lightweight
• Maintenance-free dry operation

Typical application areas

• Plant construction
• Automation
• Agricultural machines
• Mechanical engineering
• Food industry
   
  You will find plenty of additional application areas at our Industry solutions

 

When to use it? If chemical resistance is required If a cost-effective option is required If you need dirt-resistant bearings To adjust misalignments

When not to use it? If temperatures are higher than +80 °C If an integrated adjusting ring is required If diameters above 30 mm are required If rotation speeds higher than 0.5 m/s are required Use our filter options to find the suitable product

Application areas
 
Since igubal® flange bearings are designed for maintenance-free dry operation, they are especially suitable for applications in which access to the bearing is limited, in moist or wet environments or clean room environments. As a result, igubal® flange bearings are used for instance in wash-brush controls, in facade sunscreen systems, in material handling technology and in bakery equipment.
 
Assembly
 
The 2-hole igubal® flange bearings are provided with elongated holes that facilitate a trouble-free readjustment. A precise alignment of the bearing housing is not required as the flange bearing automatically compensates for error. Special adjusting rings can be used to fix the shaft.