Clevis joint with spring-loaded fixing clip and rod end bearing, GERMFE, igubal®

igubal® clevis joint
 
igubal® clevis joints can be used without problems even in rough environments. In moist or wet environments, they are resistant to weak acids and alkalines. Their resistance to dirt and dust should be noted.
igubal® clevis joints are made from solid igumid G according to DIN 71752, which can be used in combination with dimensional series E rod ends as counter partner.
 
igumid G is an extremely impact-resistant, long-fiber-reinforced polymer. Suitable for temperatures from -30 °C to +80 °C in long-term use.
 
igubal® rod end bearing with female thread
 
igubal® rod ends are corrosion-resistant can be used without problems in harsh environments. In moist or wet environments, they are resistant to weak acids and alkalines. Their resistance to dirt and dust should be noted.
 
Housing made of igumid G.
 
In standard spherical bearings, the spherical ball is made from iglide® L280 material, which is known for lowest coefficients of friction in dry operation and extremely low tendency to stick-slip. This is especially important for low loads and very slow movements.

• Very lightweight
• heavy-duty
• Absolutely corrosion-resistant
• High tensile force
• Vibration dampening
• Noise-dampening

Typical application areas

• Food industry
• Packaging
• Heavy duty
• Automotive industry
• Disposal technology
• Automation
   
  You will find plenty of additional application areas at our Industry solutions

When to use it? If heavy-duty is required If corrosion resistance is required If no lubrication is to be used If you want to save weight If maintenance-free, dry operation is required If simple assembly is planned When combinations with pneumatic cylinders and gas struts are planned

When not to use it? If temperatures are higher than +80 °C If diameters above 20 mm are required Use our filter options to find the suitable product