Inquiry / Contact
igus® inc.

PO BOX 14349

East Providence

RI 02914

+1 800 521 2747
+1 401 438 7270

Electric motors

Cost-effective and scalable motors for linear axes, linear robots and delta robots
The portfolio of igus® includes stepper motors in several sizes, extendable with encoders and brakes, cost-effective and quiet DC motors, which can also be operated via battery without complex external power electronics, and EC motors for fast, powerful movements. Gearboxes that reduce the output speed and thus increase the available drive torque.
The motors are used, among other things, in packaging and inspection technology, for example in sensor and camera travel - also in the food sector, outdoors and areas exposed to splashes and water spray.
 

Products

Filter

Size
Electrical information
Fitting
System
Design

Number of products: 35

drylin® E stepper motor with stranded wire, NEMA 17
  • Installation size: NEMA17/flange installation size 42mm
  • Protection class motor housing: IP65 (Shaft seal IP52)
  • Holding torque: 0.50Nm
  • Nominal current: 1.80A
  • Motor connection: strands and encoder, JST connector

from 198.00 USD / Pc.

1 of 1 sizes ready for shipping in in 2 - 6 weeks
Shop now
drylin® E stepper motor, NEMA 17
  • Installation size: NEMA17/flange installation size 42mm
  • Protection class motor housing: IP65 (shaft seal IP52), motor with stranded wires IP40
  • Holding torque: 0.5Nm
  • Nominal current: 1.80A
  • Motor connection: Metric connector

from 75.00 USD / Pc.

1 of 1 sizes ready for shipping in 24 h
Shop now
drylin® E stepper motor with encoder, NEMA 17
  • Installation size: NEMA17/flange installation size 42mm
  • Protection class motor housing: IP65 (Shaft seal IP52)
  • Holding torque: 0.50Nm
  • Nominal current: 1.80A
  • Motor connection: Metric connector

from 336.00 USD / Pc.

Available on request
Shop now
drylin® E stepper motor with encoder and brakes, NEMA 17
  • Installation size: NEMA17/flange installation size 42mm
  • Protection class motor housing: IP65 (Shaft seal IP52)
  • Holding torque: 0.5Nm
  • Nominal current: 1.8A
  • Motor connection: Metric connector

from 648.00 USD / Pc.

1 of 1 sizes ready for shipping in in 2 - 6 weeks
Shop now
drylin® E stepper motor with stranded wire, NEMA 23
  • Installation size: NEMA23/flange installation size 56mm
  • Protection class motor housing: IP65 (shaft seal IP52), motor with stranded wires IP40
  • Holding torque: 2.00Nm
  • Nominal current: 4.20A
  • Motor connection: strands and encoder, JST connector

from 111.00 USD / Pc.

1 of 1 sizes ready for shipping in 24 h
Shop now
drylin® E stepper motor with connector, NEMA 23
  • Installation size: NEMA23/flange installation size 56mm
  • Protection class motor housing: IP65 (Shaft seal IP52)
  • Holding torque: 2.00Nm
  • Nominal current: 4.20A
  • Motor connection: Metric connector

from 263.67 USD / Pc.

1 of 1 sizes ready for shipping in in 2 - 6 weeks
Shop now
drylin® E stepper motor with encoder, NEMA 23
  • Installation size: NEMA23/flange installation size 56mm
  • Protection class motor housing: IP65 (Shaft seal IP52)
  • Holding torque: 2.00Nm
  • Nominal current: 4.20A
  • Motor connection: Metric connector

from 425.00 USD / Pc.

1 of 1 sizes ready for shipping in in 2 - 6 weeks
Shop now
drylin® E stepper motor with encoder and brakes, NEMA 23
  • Installation size: NEMA23/flange installation size 56mm
  • Protection class motor housing: IP65 (Shaft seal IP52)
  • Holding torque: 2.00Nm
  • Nominal current: 4.20A
  • Motor connection: Metric connector

from 947.75 USD / Pc.

1 of 1 sizes ready for shipping in in 2 - 6 weeks
Shop now
drylin® E stepper motor, splash guard, NEMA 23
  • Installation size: NEMA23/flange installation size 56mm
  • Protection class motor housing: IP65 
  • Holding torque: 1.70Nm
  • Nominal current: 3.00A
  • Motor connection: Metric connector

Upon request

1 of 1 sizes ready for shipping in in 2 - 6 weeks
Shop now
drylin® E stepper motor with encoder, splash guard, NEMA 23
  • Installation size: NEMA23/flange installation size 56mm
  • Protection class motor housing: IP65 
  • Holding torque: 1.70Nm
  • Nominal current: 3.00A
  • Motor connection: Metric connector

Upon request

Available on request
Shop now
drylin® E stepper motor with stranded wire, vacuum, NEMA 23
  • Installation size: NEMA23/flange installation size 56mm
  • Protection class motor housing: IP00 (vacuum)
  • Holding torque: 0.70Nm
  • Nominal current: 2.50A
  • Motor connection: Stranded wire

Upon request

1 of 1 sizes ready for shipping in in 2 - 6 weeks
Shop now
drylin® E stepper motor, waterproof, NEMA 23
  • Installation size: NEMA23/flange installation size 56mm
  • Protection class motor housing: IP68 (10 m)
  • Holding torque: 1.30Nm
  • Nominal current: 4.20A
  • Motor connection: terminal box

Upon request

1 of 1 sizes ready for shipping in in 2 - 6 weeks
Shop now
drylin® E stepper motor with encoder, waterproof, NEMA 23
  • Installation size: NEMA23/flange installation size 56mm
  • Protection class motor housing: IP68 (10 m)
  • Holding torque: 1.30Nm
  • Nominal current: 4.20A
  • Motor connection: terminal box

Upon request

1 of 1 sizes ready for shipping in in 2 - 6 weeks
Shop now
drylin® E stepper motor with stranded wire, NEMA 23XL
  • Installation size: NEMA23XL/flange dimension 60 mm
  • Protection class motor housing: IP65 (shaft seal IP52), motor with stranded wires IP40
  • Holding torque: 3.50Nm
  • Nominal current: 4.20A
  • Moto connection: Strand with JST connector

from 154.58 USD / Pc.

1 of 1 sizes ready for shipping in in 2 - 6 weeks
Shop now
drylin® E stepper motor, NEMA 23XL
  • Installation size: NEMA23XL/flange dimension 60 mm
  • Protection class motor housing: IP65 (Shaft seal IP52)
  • Holding torque: 3.50Nm
  • Nominal current: 4.20A
  • Motor connection: Metric connector

from 241.26 USD / Pc.

1 of 1 sizes ready for shipping in in 2 - 6 weeks
Shop now