iglide® V400 polymer flange bearing, metric

iglide® V400 | For soft shafts, up to +392 °F

PFAS-tested: All iglide materials labeled as "PFAS-tested" were tested for the 96 PFAS substances considered critical for the environment and health using the SQP M1227 test method (LC-MS/MS and GC-MS) and do not contain any substances >0.1% by mass. This category excludes substances from the group of fluoropolymers.

• Excellent wear resistance with soft shaft materials and for temperatures up to +392 °F
• Good resistance to chemicals
• High elasticity
• Dry-running and maintenance-free
• Standard range from stock

Highly wear resistant bearing for soft shafts and temperatures up to +392 °F with low moisture absorption and excellent resistance to chemicals.
 
 

When to use it? When extreme wear resistance is required with soft shafts When the highest wear resistance at temperatures above +212 °F is required When vibrations and edge pressure are present When the bearing should be resistant to chemicals

When not to use? For hardened shafts For applications at normal temperatures When a cost-effective universal bearing is required

Tolerances and measurement system
The installation dimensions and tolerances of the iglide® plain bearings are a function of the material and wall thicknesses. For each material, the moisture absorption and the thermal expansion are imperative. Plain bearings with low moisture absorption can be designed with a minimal amount of tolerance. For wall thickness, the rule is: The thicker the bearings are, the larger the tolerances must be.
 
Assembly
iglide® bearings are press-fit bearings. The inner diameter adjusts only after press-fit in the proper housing bore with a recommended tolerance. The before press-fit oversized dimension can be up to 2% of the inner diameter. In this manner, the secure press-fitting of the bearing is achieved. Axial or radial shifts in the housing are also prevented.