1 from 2
igus-icon-lupe
igus-three-dimensional-model
- Part number: HFM-0405-04
- Material: iglide® H
- Shape: Flange bearings
- Dimensions:
- d1 4 mm
- d2 5.5 mm
- d3 9.5 mm
- b1 4 mm
- b2 0.75 mm
- Customize dimensions
- Manufacturing method: Injection molding
- Service life:
PFAS-tested: All iglide materials labeled as "PFAS-tested" were tested for 96 PFAS substances considered critical for the environment and health. This category excludes substances from the group of fluoropolymers.
- High resistance to temperature and chemicals
- Can be used underwater
- For high temperatures
- Resistant to chemicals
iglidur® H | High temperature and chemical resistance
iglidur® H is a fibre-reinforced thermoplastic material that was specially developed for applications in high humidity or under water. iglidur® H can be used completely lubrication-free; when used in wet areas, the surrounding medium serves as an additional lubricant. Suitable for temperatures up to +200°C. Very low coefficient of friction in conjunction with hardened shafts.
Typical application areas
- Beverage industry
- Medical technology
- Offshore
- Shipbuilding
When do I use it?
- For use under water
- When high temperature resistance is required
- For high mechanical loads
- For use in contact with chemicals
When should I not use it?
- When the highest wear resistance under water is required
- When the best universal chemical resistance is required
- For the highest compressive strength at higher temperatures
Unsure if it fits?
