- Part number: G1FM-0608-04
- Material: iglide® G1
- Shape: Shop flange bearings
- Dimensions:
- d1 6 mm
- d2 8 mm
- d3 12 mm
- b1 4 mm
- b2 1 mm
- Customize dimensions
- Manufacturing method: Injection molding
- Service life:
PFAS-tested: All iglide materials labeled as "PFAS-tested" were tested for 96 PFAS substances considered critical for the environment and health. This category excludes substances from the group of fluoropolymers.
- Lasts twice as long even when using high loads
- Up to 25% less wear using low loads
- Long-term service temperature up to +350°F
- Pressfit up to +250°F (iglide® G: up to +170°F)
- Moisture absorption reduced by 50%
iglidur® G1 | The new lubrication-free standard
With iglidur® G1 we offer a wear-resistant and versatile material for a wide range of applications. Recommended for applications with medium to high loads at medium speeds. Even at elevated temperatures up to 180°C, iglidur® G1 is dimensionally stable, wear-resistant and offers very low moisture absorption. iglidur® G1 is suitable for a multitude of different applications and represents an all-rounder with very good running performance.
Typical applications
- Automotive
- Machine tools
- Furniture/Industrial design
- Fitness and sports
When to use it?
- When an economical all-round performance material is required
- For low to average surface speeds
- When the material needs to run on different shaft materials
- For pivoting and rotational movements
When not to use it?
- When mechanical rework is required
- When the highest wear resistance is required
- When universal chemical resistance is required
- When temperatures are continuously greater than +180°C
- When used under water
