Inquiry / Contact
igus® inc.

PO BOX 14349

East Providence

RI 02914

+1 800 521 2747
+1 401 438 7270

iglide® T500, sleeve bearing with flange, mm

  • Up to 21755 psi static
  • Temperature resistant from -212 °F to +482 °F in continuous operation
  • Universal resistance to chemicals
  • High compressive strength
  • CO2 equivalent: per piece available
Product description
iglide® T500 | Up to 21755 psi static
  • Over 250 dimensions available from stock
  • Temperature resistant from -212 °F to +482 °F in continuous operation
  • Universal resistance to chemicals
  • High compressive strength
  • Very low moisture absorption
  • Excellent wear resistance through the entire temperature range
iglide® T500 is defined by its combination of high temperature resistance with compressive strength, along with high resistance to chemicals. iglide® T500 is designed for higher speeds than other iglide® bearings.
Typical application areas

Beverage production & packaging
Plastics processing

You will find plenty of additional application areas at our Browse all Industries
When to use it?
  • For pressure loads up to 21755 psi
  • For linear movements with stainless steel at high temperatures
  • Universal resistance to chemicals
  • Temperature resistant from -212 °F to +482 °F in continuous operation (short-term to +599 °F)
  • Very low moisture absorption
  • High wear resistance over the entire temperature range
When not to use?
  • For very low wear at high loads
  • For economical underwater applications
  • For edge loads

Use our filter options to find the most suitable product

Tolerances and measurement system
The installation dimensions and tolerances of the iglide® plain bearings are a function of the material and wall thicknesses. For each material, the moisture absorption and the thermal expansion are imperative. Plain bearings with low moisture absorption can be designed with a minimal amount of tolerance. For wall thickness, the rule is: The thicker the bearings are, the larger the tolerances must be.
Testing methods
iglide® bearings are press-fit bearings. The inner diameter adjusts only after press-fit in the proper housing bore with a recommended tolerance. The before press-fit oversized dimension can be up to 2% of the inner diameter. In this manner, the secure press-fitting of the bearing is achieved. Axial or radial shifts in the housing are also prevented.
iglide® - assembling, gluing, machining
Certificates and standards
RoHS compliant
According to 2011/65/EU (RoHS 2) CO2 equivalent
available per piece
Technical data

Application Assistance

For further questions or product information, please contact:

Nicole Lang

iglide® Product Manager


Customer Service:

Monday to Friday from 8 am - 8 pm