iglide® J | The versatile endurance runner - Over 250 dimensions available from stock
- Low wear against different shaft materials
- Low coefficients of friction in dry operation
- Vibration-dampening
- Good resistance to chemicals
- Best material to use with soft shaft materials
- very little humidity absoption
One main advantage of iglide® J plain bearings is the combination of a low coefficient of friction in dry operation and the low stick-slip tendency. With a recommended maximum surface pressure of 5076 psi, iglide® J plain bearings are not suitable for extreme loads.
Typical application areasVending machinesPrintersBeverage production & packagingAviationCleanroomYou will find plenty of additional application areas at our
Industry solutions When to use it?- For high speeds
- For highest wear resistance at low to medium pressures
- Low wear against different shafts
- Low coefficient of friction in dry operation
- Vibration dampening
- Good chemical resistance
- Best performance with soft shaft materials
- very little humidity absoption
| When not to use?- When high pressures occur
- When short-term temperatures occur that are higher +248 °F
- When a cost-effective bearing for occasional movements is necessary
Use our filter options to find the most suitable product |
Certificates and standards