igumid P150 is an extremely strong and rigid 3D printing filament due to fiber reinforcement. It was specially developed as a material partner for
iglidur I150-PF for the production of particularly strong and at the same time friction-optimized components in multi-material printing. Furthermore, it can be used for the printing of stable structural components. Thanks to its high strength and high rigidity, igumid P150 is ideally suited for lightweight construction with low material requirements.
igumid P150 can be purchased as a filament for processing with your own printer or ordered in the
Online 3D printing service via STEP file as a stand-alone component or as a 2K component in combination with iglidur I150.
Due to the abrasive fibres, the printer used for processing the filament should have a wear-resistant (e.g. hardened) nozzle and extruder pinion. For better adhesion to the printing plate, the
Bonding agent for tribo-filaments can be used.
Further information on the use of igumid P150 can be found on the
Multi-material 3D printing website. You can find
Design instructions for multi-material print in our blog.
