1. Lightning fast opening and closing of lids with zipper2. Small pitch for extremely quiet operation (11 links/ft (33/m))3. Protection against dirt and chips
Inner widths Bi: 0.59 up to 3.94 (15 - 100 mm)Bending radii R: 2.48, 2.95, 3.94, 4.33, 4.92, 5.71, 7.09 (63, 75, 100, 110, 125, 145, 180 mm)Pitch: 1.2 (30.5 mm) per link = 11links/ft (33m)
E2 mini, Series B17
** The calculated length corresponds to the chain length without mounting brackets.
A=Moving End , B=Fixed EndPitch: 1.2 (30.5 mm) per linkLinks per ft: 11 (33/m)Travel: SChain length = S/2 + K
Dependency of the unsupported length on the additional loadX axis: Unsupported length in ft FLB/FLGY axis: Additional load in lbs/ftLower scale: Length of travel S in ftFLB = unsupported with permissible sagFLG = unsupported with straight upper run
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
Mounting bracket with and without tiewrap plate
7 widths and 7 bending radii
Closed energy tube with zipper
Design specificationFurther information on "unsupported application"
Design specificationFurther information on "gliding application"
2. Full-width shelves
Two options for interior separation of the energy tube R15 are available 1. Separators They are used if only vertical division is required. A slotted separator is also used for this type of division. The separator can also be used with shelving for continuous, horizontal division. 2. Interior separation with continuous, horizontal division This is useful if many thin cables with similar or identical diameters are employed.
2. Interior separation with end-to-end horizontal division It is useful in application with many thin cables with similar or same diameters.
Option 1 "pivoting"
Option 2 "locking"
Data protection declaration