1. Universal and sealed:
enclosed KMA mounting bracket
with attachment from any side
2. Smooth, edge-free design,
Chips cannot stick
3. Quick assembly:
lids snap-open along both sides
4. Integrated separation structure: ideal for
5. Protected: covered pin and bore connection
6. Quiet operation: due to built-in brake
7. Lightweight with
large inner height:
good ratio of outer to
dog system for large
* The required clearance height is HF = H + 40 mm (with 2,0 kg/m fill weight), this should be taken into account for all application types.Please contact us if you have particularly narrow space conditions.
** The calculated length corresponds to the chain length without mounting brackets.
A=moving end, B=fixed endPitch: 60 mmLinks per m: 17Travel: STube length= S/2 + K
Unsupported length versus fill weightX axis: Unsupported length in m FLB/FLGY axis: Fill weight in kg/mLower scale: Travel S in mFLB = Unsupported with permissible sagFLG = Unsupported with straight upper run
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
Design specificationFurther information on "unsupported application"
Design specificationFurther information on "gliding application"
Other installation types
Option 1: Separators
Option 1 - SeparatorsSeparators can be placed anywhere in the chain's cross-section to divide the interior of the e-chain® - As standard, separators are fitted every 2nd chain link!
75.1 Standard - for all uses
Separator, wide base for maximum holding force
75.5 Locks in securely in preset increments
The locking separator for the opening crossbar can be positioned exactly. Recommended for side-mounted applications.
3200.X Horizontal division
Locks in securely at both ends of the separator,
secure width fixing possible. Can be used as full-width shelf for
integrated subdivision or as partial shelf
KMA - pivoting
Data protection declaration