Inquiry / Contact
igus® inc.
Version LT for cold storage down to -22°F
Version UW for under water use
The long standing toothed belt drives have been developed for the fast positioning of low loads. The linear units with toothed belt drive are corrosion resistant, light and compact, besides having a low mass inertia due to low deadweight of guide and sliding carriage.
100 % self-lubricating version with plain bearings
Many-sided and simple assembly
Freely selectable stroke length
Low height and solid
Light and corrosion resistant
| Technical data | ZLW-1040-LT for cold storage | ZLW-1040-UW for underwater use | ||
|---|---|---|---|---|
| Weight without stroke | [lb] | 2.21 | 2.21 | |
| weight 100mm stroke | [mm] | 0,14 | 0,14 | |
| Max. stroke length* | [mm] | 2.000 | 1.000 | |
| transmission | [mm/U] | 70 | 70 | |
| Gear teeth | AT 5 | AT 5 | ||
| Toothed belt material | TPUKF2 | with stainless steel tie beam | ||
| Toothed belt width | [mm] | 16 | 16 | |
| Belt tension | [N] | 200 | 50 | |
| Max. radial load | [N] | 300 | 100 | |
| Guide bearing | cold ball bearing | xiros® ball bearing | ||
| Max. speed | [ft/s] | 16.4 | 3.28 | |
| position variants of carriage, load dependent | [mm] | ±0,2 | ±0,5 | |
| * longer stroke length upon request | ||||
| Part. No. | A | Al | H | E2 | l | hc | E3 | R | f | lt | sg | ha | lz | l2 | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| -0,3 | ±0,15 | ±0,15 | ±0,15 | ±0,3 | ||||||||||||
| ZLW-1040-LT-100-L (1) | 74 | 100 | 45 | 60 | 209 | 22.5 | 87 | 40 | 1 | 52 | M6 | 22 | 27 | 20 | 433.67 USD | |
| ZLW-1040-LT-100-R (1) | 74 | 100 | 45 | 60 | 209 | 22.5 | 87 | 40 | 1 | 52 | M6 | 22 | 27 | 20 | 433.67 USD |
(1) Dimension X is cut-to-order
| Part. No. | d2 | X | E | AP | LP | dp | n | np | nw | nh | T1 | T2 | d |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ±0,2 | -1 | ±0,25 | ±0,25 | ||||||||||
| ZLW-1040-LT-100-L (1) | 10 | - | 60 | 78 | 40 | 6.4 | 5.2 | 9.5 | 4.3 | 15.5 | 36 | 26.5 | 5 |
| ZLW-1040-LT-100-R (1) | 10 | - | 60 | 78 | 40 | 6.4 | 5.2 | 9.5 | 4.3 | 15.5 | 36 | 26.5 | 5 |
(1) Dimension X is cut-to-order
| Part. No. | A | Al | H | E2 | l | hc | E3 | R | f | lt | sg | ha | lz | l2 | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| -0,3 | ±0,15 | ±0,15 | ±0,15 | ±0,3 | ||||||||||||
| ZLW-1040-UW-100-L (1) | 74 | 100 | 45 | 60 | 209 | 22.5 | 87 | 40 | 1 | 52 | M6 | 22 | 27 | 20 | 433.67 USD | |
| ZLW-1040-UW-100-R (1) | 74 | 100 | 45 | 60 | 209 | 22.5 | 87 | 40 | 1 | 52 | M6 | 22 | 27 | 20 | 433.67 USD |
(1) Dimension X is cut-to-order
| Part. No. | d2 | X | E | AP | LP | dp | n | np | nw | nh | T1 | T2 | d |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ±0,2 | -1 | ±0,25 | ±0,25 | ||||||||||
| ZLW-1040-UW-100-L (1) | 10 | - | 60 | 78 | 40 | 6.4 | 5.2 | 9.5 | 4.3 | 15.5 | 36 | 26.5 | 5 |
| ZLW-1040-UW-100-R (1) | 10 | - | 60 | 78 | 40 | 6.4 | 5.2 | 9.5 | 4.3 | 15.5 | 36 | 26.5 | 5 |
(1) Dimension X is cut-to-order
