My contact person
igus® inc.

PO BOX 14349

East Providence

RI 02914

Fon +1 800 521 2747

Fax +1 401 438 7270

iglide® J3, sleeve bearing with flange, mm

  • The new endurance runner: specialist for pulsating loads
  • Low coefficients of friction
  • Good liquid media resistance
  • Low humidity absorption
Product description
iglide® J3 |The new endurance runner: specialist for pulsating loads
 
  • Low coefficients of friction
  • Good liquid media resistance
  • Low humidity absorption
  • PTFE-free
  • Lubrication and maintenance-free
  • Standard range from stock
iglide® J3 is a material with improved wear resistance at low to medium loads and high speed. The lifetime is up to 300 % longer than iglide® J – the proven top endurance runner material.
 
Typical application areas

Vending machines
Printers
Beverage production & packaging
Glass manufacturing and processing
Aviation

You will find plenty of additional application areas at our Industry solutions
 
 
When to use it?
  • If wear resistance rotating or oscillating of iglide® J should be optimized
  • When very low coefficients of friction in dry operation are required
  • If high wear resistance at low loads is required
  • If low moisture absorption is requested
  • If good liquid media resistance is required
When not to use?
  • If you need a wear resistant bearing for linear motion
  • If temperatures are higher than +194 °F
  • If radial surface pressure is higher than 5076 psi

 
Use our filter options to find the most suitable product

Tolerances and measurement system
The installation dimensions and tolerances of the iglide® plain bearings are a function of the material and wall thicknesses. For each material, the moisture absorption and the thermal expansion are imperative. Plain bearings with low moisture absorption can be designed with a minimal amount of tolerance. For wall thickness, the rule is: The thicker the bearings are, the larger the tolerances must be.
Testing methods
 
Assembly
iglide® bearings are press-fit bearings. The inner diameter adjusts only after press-fit in the proper housing bore with a recommended tolerance. The before press-fit oversized dimension can be up to 2% of the inner diameter. In this manner, the secure press-fitting of the bearing is achieved. Axial or radial shifts in the housing are also prevented.
iglide® - assembling, gluing, machining
 
Certificates and standards
RoHS compliant<br>According to 2011/65/EU (RoHS 2)
Technical data
Accessories
Downloads

Consulting

I would be happy to answer your questions personally

Shipping and consultation

In person:

Monday to Friday from 7 am - 8 pm

Online:

24h