Inquiry / Contact
igus® inc.

PO BOX 14349

East Providence

RI 02914

+1 800 521 2747
+1 401 438 7270

Products

Number of products: 99

drylin® R hard-anodized, aluminum shaft, AWM
  • Lightweight
  • Ideal in combination with iglide® J/J200 liners: JUM/3200UM
  • High wear resistance
  • Corrosion resistant

from 28.99 USD/m

10 of 11 sizes ready for shipping in 24 hours
Shop now
dryLin® R pillow block RJUM-05
  • Design: short, closed design
  • Material sliding element: iglide® J
  • Housing material: aluminum

from 34.17 USD/Pc.

2 of 9 sizes ready for shipping in 24 hours
Shop now
dryLin® R pillow block FJUMT-01
  • Design: closed design, tandem design, round flange
  • Material sliding element: iglide® J
  • Housing material: anodized aluminum

from 36.21 USD/Pc.

7 of 9 sizes ready for shipping in 24 hours
Shop now
drylin® R liner JUM-01: Standard clearance for aluminum/stainless steel shafts
  • Material: iglide® J
  • Also available in low-clearance JUM-11 (JUM-20 N. America)
  • For all igus shafting

from 3.94 USD/Pc.

10 of 10 sizes ready for shipping in 24 hours
Shop now
dryLin® R pillow block OJUM-06
  • Design: long, open design
  • Material sliding element: iglide® J
  • Housing material: anodized aluminum

from 51.93 USD/Pc.

6 of 7 sizes ready for shipping in 24 hours
Shop now
drylin® R aluminum shaft, supported, AWMU (AWUM, USA), EN AW 6061/6060/6063
  • Lightweight
  • Ideal in combination with liners made from iglide® J/J200
  • Low wear
  • Corrosion resistant

from 72.85 USD/m

5 of 6 sizes ready for shipping in 24 hours
Shop now
drylin® R liner JUM-02
  • Material: iglide® J For use indoors and out
  • Version: Closed, short design 

from 3.30 USD/Pc.

7 of 9 sizes ready for shipping in 24 hours
Shop now
drylin® R linear slide bearing RJ4JP-01
  • Alternative to ball bearings with Japanese dimension
  • Quick assembly
  • Secured by circlip/c-clips
  • Plain bearing material: iglide® J4

from 2.28 USD/Pc.

7 of 7 sizes ready for shipping in 24 hours
Shop now
dryLin® R pillow block FJUM-01
  • Design: closed design, round flange
  • Material sliding element: iglide® J
  • Housing material: anodized aluminum

from 27.21 USD/Pc.

8 of 9 sizes ready for shipping in 24 hours
Shop now
drylin® R stainless steel shaft, EEWM, 1.4034 (420C)
  • Corrosion resistant
  • High chemical resistance
  • Ideal solution for wet environments

Upon request

8 of 10 sizes ready for shipping in 24 hours
Shop now
drylin® R linear slide bearing RJUM-01
  • Dimensionally repalces ball bearings
  • Secured by circlip/c-clips
  • Closed anodized aluminum adapter
  • Liner material iglide J (other materials upon request)
  • Available in self-aligning version RJUM-03
  • Available in low clearance
  • For all igus shafting

from 9.61 USD/Pc.

10 of 12 sizes ready for shipping in 24 hours
Shop now
dryLin® R pillow block RJUM-06
  • Dimensionally replaces ball bearings
  • Low-cost solution
  • Sliding material (others available upon request)
  • Housing material: anondized aluminum
  • Available in low-clearance and other liner materials
  • For all igus shafting
  • Design: closed housing, long design
  • Material sliding element: iglide® J
  • Housing material: anodized aluminum

from 41.30 USD/Pc.

4 of 7 sizes ready for shipping in 24 hours
Shop now
drylin® R liner J200UM-01
  • Material: iglide® J200 
  • Version: Closed housing, long design 

from 4.73 USD/Pc.

5 of 8 sizes ready for shipping in 24 hours
Shop now
drylin® R steel shaft, SWM, 1.1213 (1055)
  • lightweight
  • High load capacity
  • Ideal for dry environments
  • Lower coefficient with iglide® plastic liners

Upon request

6 of 10 sizes ready for shipping in 24 hours
Shop now
drylin® R liner E7UMO-01
  • Material: iglide® E7 
  • Version: long, Open design for supported shafting 

Upon request

Available on request
Shop now

Application Assistance

For further questions or product information, please contact:

Photo
Matt Mowry

dryLin® Product Manager

Email

Customer Service:

Monday to Friday from 8 am - 8 pm

Online:

24h