Inquiry / Contact
igus® inc.

PO BOX 14349

East Providence

RI 02914

+1 800 521 2747
+1 401 438 7270

drylin® R - Stainless Steel linear bearing RJUI / RJUM-01-ESR

Special properties

303 Stainless Steel

Dimensionally equivalent to standard recirculating ball bearings

For long-term temperatures up to 194°F

Can use iglide® T500 material liners for long-term temperatures up to 482°F

Metric and imperial dimensions available

DryLin® R Stainless Steel 303 linear bearing with plastic liner  
DryLin® R Stainless Steel 303 linear bearing drawing  

Stainless Steel linear bearing RJUI-01-ESR, Inch

Part No.:
d2 [inch]:
Order no. Ø Shaft Tolerance d2 B B1 s dn e o do    
  [Inch] [Inch] [Inch]
h7
[Inch]
h10
[Inch]
h10
[Inch]
h10
[Inch]
h10
[Inch] [Inch]
-0.004
[Inch]    
 RJUI-01-08ESR 1/2 .0016-.0032 0.8750 1.25 0.979 0.052 0.82 0.281 0.125 0.712 50.42 USD 
 RJUI-01-10ESR 5/8 .0016-.0032 1.1250 1.5 1.124 0.062 1.06 0.312 0.125 0.962 57.64 USD 
 RJUI-01-12ESR 3/4 .0016-.0032 1.2500 1.625 1.186 0.062 1.177 0.312 0.125 1.087 61.44 USD 
 RJUI-01-16ESR 1 .0016-.0032 1.5625 2.25 1.773 0.074 1.471 0.5 0.125 1.399 82.80 USD 
 RJUI-01-20ESR 1-1/4 .0020-.0041 2 2.62 2.023 0.074 1.889 0.625 0.125 1.837 106.48 USD 
 RJUI-01-24ESR 1-1/2 .0020-.0041 2.375 2.62 2.44 0.074 1.889 0.625 0.125 2.152 130.16 USD 
More about selected part:
3D-CAD Product page Sample request Experts PDF Quote request Price list myCatalog
Nominal widths under 3/8 inch are supplied with press-fitted cylindrical bearings.
Tolerance according to igus® test method

Stainless Steel linear bearing RJUM-01-ES, mm

Part No.:
d1 [mm]:
Inner diameter, load capacity and weight
Order no. shaft
Ø
Tolerance
bearing inner
diameter
pmax. [N]
dynamic
P = 5 MPa
pmax. [N]
static
P = 35 MPa
   
  [mm] [mm]        
 RJUM-01-12ES 12 0,030-0,088 216 1512 Upon request 
 RJUM-01-16ES 16 0,030-0,088 324 2268 Upon request 
 RJUM-01-20ES 20 0,030-0,091 506.25 3543.75 Upon request 
 RJUM-01-25ES 25 0,030-0,091 815.63 5709.38 Upon request 
 RJUM-01-30ES 30 0,040-0,110 1147.5 8032.5 Upon request 
More about selected part:
3D-CAD Sample request Experts Quote request Price list myCatalog
Tolerance according to igus® test method
Dimensions [mm]
Order no. d1 d2 B B1 s dn
  [mm] [mm]
h7
[mm]
h10
[mm]
H10
[mm]
H10
[mm]
h10
 RJUM-01-12ES 12 22 32 22.6 1.3 20.5
 RJUM-01-16ES 16 26 36 24.6 1.3 24.2
 RJUM-01-20ES 20 32 45 31.2 1.6 29.6
 RJUM-01-25ES 25 40 58 43.7 1.85 36.5
 RJUM-01-30ES 30 47 68 51.7 1.85 43.5
More about selected part:
3D-CAD Sample request Experts Quote request Price list myCatalog

Bearings of the RJUM-01 series are combinable with:

drylin® R - RQA

Quad block, enclosed, mm

drylin® R - RQA    

drylin® R - RTA

Pillow block, tandem design, enclosed, mm

drylin® R - RTA    

drylin® R - RGA

Linear housing, long design, mm

drylin® R - RGA    

drylin® R - RGAS

Linear housing, enclosed, short design, mm

drylin® R - RGAS    

Shafts and supported shafts

Made of aluminum, steel, stainless steel or carbon fiber

Shafts and supported shafts    

Liners of the JUM-11 series with low bearing clearance can be used in the RJUM-01 housing.