Inquiry / Contact
igus® inc.

PO BOX 14349

East Providence

RI 02914

+1 800 521 2747
+1 401 438 7270
US(EN)

drylin® R - Self-aligning linear plain bearings Low Clearance, open, OJUM-23, mm

Special features

Open, anodized aluminum adapter with reduced outer diameter, spherical area on the outer diameter for automatic alignment compensation, O-rings for elastic seating, hard-anodized

Dimensions correspond to the standard for recirculating ball bearings

Equipped with JUMO-20 liner made from iglide® J

Recommended housing bore H7

Attachment by mounting bolts (not included in delivery)



Self-aligning linear plain bearing Low Clearance, open, OJUM-23, mm

Shaft:

 

Inner diameter, load capacity and weight

Order no. Shaft
Ø
Housing-
bore
Ø H7
Tolerance
bearing inner
diameter
F max. [N]
dynamic
P = 5 MPa
F max. [N]
static
P = 35 MPa
Weight    
  [mm] [mm] [mm] 90° 180° 90° 180° [g]    
OJUM-23-10 10 19 725 500 196 5075 3500 1370 10 16.15 USD Add to shopping cart
OJUM-23-12 12 22 960 635 240 6720 4445 1680 13 14.97 USD Add to shopping cart
OJUM-23-16 16 26 1440 990 396 10080 6943 2772 19 21.82 USD Add to shopping cart
OJUM-23-20 20 32 2250 1800 900 15750 12600 6300 38 27.49 USD Add to shopping cart
OJUM-23-25 25 40 3625 2953 1523 25375 20670 10658 63 37.49 USD Add to shopping cart
OJUM-23-30 30 47 5100 4250 2278 35700 29735 15946 119 48.36 USD Add to shopping cart
OJUM-23-40 40 62 8000 6810 3800 56000 47660 26600 250 55.35 USD Add to shopping cart
OJUM-23-50 50 75 12500 10750 6125 87500 75265 42875 431 96.88 USD Add to shopping cart
More about selected part:
3D-CAD 3D-CAD
Sample request Sample request
Quote request Quote request
myCatalog myCatalog

Tolerance according to igus® test method


Dimensions [mm]

Order no. d1 d2 ds e o do B1 s B R W a f h
  [mm] [mm]
h7
[mm]
h10
[mm] [mm]
+0.1
[mm] [mm]
H10
[mm]
H10
[mm]
h10
[mm] [mm]
-1
[mm]
+0.1
±0.2 -0.5
OJUM-23-10 0.39 18,8 18,5 5 1.86 15,4 21.8 1.3 28.9 13 7,3 0 1.2
OJUM-23-12 0.47 21,8 21,5 6 1.86 18,4 22.8 1.3 31.9 18 9 3 1.2
OJUM-23-16 0.63 25,8 25,5 8 2.86 20,4 24.9 1.3 35.9 32 11,6 2.2 1.2
OJUM-23-20 0.79 31,8 31,5 10 2.86 26,4 31.5 1.6 44.8 50 12 2.2 1.2
OJUM-23-25 0.98 39,8 39,0 12.5 2.86 34,4 44.1 1.85 57.8 39 14,5 3 1.5
OJUM-23-30 1.18 46,7 46,0 15 2.86 41,4 52.1 1.85 67.8 57 16,6 3 2
OJUM-23-40 1.57 61,7 61,0 20 2.86 56,4 60.9 2.15 79.8 100 21 3 2
OJUM-23-50 1.97 74,7 74,0 25 2.86 69,4 78 2.65 99.8 157 25,5 5 2
More about selected part:
3D-CAD 3D-CAD
Sample request Sample request
Quote request Quote request
myCatalog myCatalog

Bearings of the OJUM-03 series are combinable with:

drylin® R - OGA

Linear housing, open, long design, mm

drylin® R - AWUM

Supported aluminum shaft, mm

Delivery time on request

The terms "igus", "Apiro", "chainflex", "CFRIP", "conprotect", "CTD", "drylin", "dry-tech", "dryspin", "easy chain", "e-chain", "e-chain systems", "e-ketten", "e-kettensysteme", "e-skin", "e-spool", "flizz", "ibow", "igear", "iglidur", "igubal", "kineKIT", "manus", "motion plastics", "pikchain", "plastics for longer life", "readychain", "readycable", "ReBeL", "speedigus", "triflex", "robolink", "xirodur", and "xiros" are legally protected trademarks of the igus® GmbH/ Cologne in the Federal Republic of Germany and where applicable in some foreign countries.

igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsibushi, NUM,Parker, Bosch Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mention in this website. The products offered by igus® are those of igus® GmbH

igus inc headquarters is located at 257 Ferris Ave, Rumford, RI 02916. igus enjoyneering center is located at 2055 Franklin Rd, Bloomfield Twp, MI 48302