Inquiry / Contact
igus® inc.

PO BOX 14349

East Providence

RI 02914

+1 800 521 2747
+1 401 438 7270

dry-tech®: Improve technology without lubrication

More than 50% of machine failures are caused by either too much or not enough lubrication.

igus® dry-tech® bearings are an alternative for lubricated plain and roller bearings. igus® develops tribopolymers for continuous dry-running operation.
By avoiding lubrication, dry-tech® polymer technology attains superior service life: from -148°F up to +482°F at continuous exposure, from cleanrooms to extreme dirt exposure, from vacuum to extreme humidity.
dry-tech® bearing technology for:
  • Applications without lubrication and for long service-life
  • Extreme environmental conditions
  • Lowest possible friction and wear values in continuous and intermittent operation
  • igus dry-tech

    dry-tech®: Reduce costs with tribopolymers

    More than $700 million in maintenance fees are caused annually by excessive friction and wear due to inadequate lubrication

    igus® dry-tech® bearings reduce your costs. A direct product comparison shows that you can reduce your current costs for bearing components by as much as 50%. In addition, further cost reduction potential is attained by using non-hardened shaft materials and by avoiding seals and lubrication systems.
    dry-tech® bearing technology for:
  • Up to 50% reduced procurement costs for your bearings
  • Cost savings due to simpler bearings or by avoiding other bearing components
  • Reduced inventory levels due to short delivery times as low as 24 hrs

  • The terms "igus", "Apiro", "chainflex", "CFRIP", "conprotect", "CTD", "drylin", "dry-tech", "dryspin", "easy chain", "e-chain", "e-chain systems", "e-ketten", "e-kettensysteme", "e-skin", "e-spool", "flizz", "ibow", "igear", "iglidur", "igubal", "kineKIT", "manus", "motion plastics", "pikchain", "plastics for longer life", "readychain", "readycable", "ReBeL", "speedigus", "triflex", "robolink", "xirodur", and "xiros" are legally protected trademarks of the igus® GmbH/ Cologne in the Federal Republic of Germany and where applicable in some foreign countries.

    igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsibushi, NUM,Parker, Bosch Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mention in this website. The products offered by igus® are those of igus® GmbH

    igus inc headquarters is located at 257 Ferris Ave, Rumford, RI 02916. igus enjoyneering center is located at 2055 Franklin Rd, Bloomfield Twp, MI 48302