Inquiry / Contact
igus® inc.

PO BOX 14349

East Providence

RI 02914

+1 800 521 2747
+1 401 438 7270
US(EN)

iglide® Polymer Bearings for the Construction Machinery Industry

iglide® G300, TX1, and Q2 polymer bearings are ideal for use in heavy-duty applications in dirty environments. We embed solid lubricants into each of our bearing materials for dry-running, grease-free operation. Additionally, we add base polymers for high wear resistance and reinforcing fibers for high loads and surface pressures. All iglide® bearings are maintenance-free and resistant to dirt, dust, and corrosion. Some materials, such as TX1, offer extreme loading capabilities.

iglide® bearings can be used with any shafting surface but work best when paired with GKF.  Our GKF shafts are three times more corrosion resistant than zinc or nickel plating and extend the service lives of our bearings by up to 40-60%. In our test laboratory, all iglide® plastics are tested intensively for coefficients of wear and friction, with over 10,000 tests per year providing the basis for our data and service life estimates.

Customer Applications:

Pendle Axel for Semi-Trailers

pendel axel The company Ets Payant created a pulley module that can move soil out of pits that are up to 65 meters deep. All components used had to withstand severe impacts, weathering effects, and a lot of dust, which was no problem for iglide® bearings.
Learn more

Dump Bucket Excavator

dump bucket iglide® plain bearings replaced composite bearings in the joints of a high dump bucket. They exceeded the required service life, required no maintenance, reduced weight and were about 40% more cost-effective than previous versions.
Learn more

Pedal for Construction Vehicles

foot pedals Sensata is a leading manufacturer of operating units for construction machinery. iglide® J plain bearings are dirt-resistant and able to withstand harsh environments, making them perfect for use in foot pedals for construction vehicles.
Learn more

Browse Bearings:

G300 Bearings

G300
  • Most popular iglide® material worldwide
  • High wear resistance
  • Resistance to dust and dirt
  • Cost-effective
Browse the Shop

TX1 Bearings

TX1
  • Up to 21,755 psi static
  • Temperature resistant from -212 °F to +482 °F
  • Very low moisture absorption
  • Felt seals available
Browse the Shop

Q2 Bearings

Q2 Bearings
  • Durable, heavy duty bearing
  • Dimensionally stable at high loads
  • Good abrasion and wear resistance
  • Felt seals available
Browse the Shop

Click below to learn more about GKF Shafting

GKF shafting
Learn more now

Request a Free Sample Box

construction machinery sample box
Request a sample box
 

Contact a Construction Industry Expert



Whether you're interested in end-to-end, fully assembled solutions or looking to build your own customizable project, let us assist you with a solution based on your specific application and requirements. Contact us via the form below or call us at (800) 521-2747 to discuss your project today!
 

Contact an Expert



The terms "igus", "Apiro", "chainflex", "CFRIP", "conprotect", "CTD", "drylin", "dry-tech", "dryspin", "easy chain", "e-chain", "e-chain systems", "e-ketten", "e-kettensysteme", "e-skin", "e-spool", "flizz", "ibow", "igear", "iglidur", "igubal", "kineKIT", "manus", "motion plastics", "pikchain", "plastics for longer life", "readychain", "readycable", "ReBeL", "speedigus", "triflex", "robolink", "xirodur", and "xiros" are legally protected trademarks of the igus® GmbH/ Cologne in the Federal Republic of Germany and where applicable in some foreign countries.

igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsibushi, NUM,Parker, Bosch Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mention in this website. The products offered by igus® are those of igus® GmbH

igus inc headquarters is located at 257 Ferris Ave, Rumford, RI 02916. igus enjoyneering center is located at 2055 Franklin Rd, Bloomfield Twp, MI 48302