Inquiry / Contact
igus® inc.

PO BOX 14349

East Providence

RI 02914

+1 800 521 2747
+1 401 438 7270

Control cable with 100 million cycles guaranteed

Longest durability guaranteed with 100,000,000 cycles or a bending factor of 3xd

With the unshielded and shielded cable series CF98/99 introduced in 2003, a huge technological leap in bending behavior was achieved through completely new alloys for the conductor. The increased customer requirements in terms of installation space and service life are now being met with the introduction of the new CF98.PLUS and CF99.PLUS, which offer a solution for even the most demanding machine manufacturers with a statement that shows a 250 percent increase in service life.

But even the smallest installation spaces, which require bending factors of up to 3xd, can now be reliably implemented with it. The service life terms are, of course, provided with a clear guarantee, which has been verified by UL.

Tech up

Tech up

  • Bending factor reduced to 3xd
  • Savings of 25% in installation space
  • All previous products can be entirely replaced
Tech up

Cost down

  • Service life extended by 250% to 100,000,000 cycles
  • Available from stock


  • Test (No. 5002) is being performed
  • Material development based on billions of movements in igus' in-house test laboratory


  • Sustainability thanks to a longer service life is practical resource protection, enhancing economic efficiency and protecting the environment

Application Assistance

For further questions or product information, please contact:

Timothy Marran

chainflex® Product Manager


Customer Service:

Monday to Friday from 8 am - 8 pm



The terms "igus", "Apiro", "chainflex", "CFRIP", "conprotect", "CTD", "drylin", "dry-tech", "dryspin", "easy chain", "e-chain", "e-chain systems", "e-ketten", "e-kettensysteme", "e-skin", "e-spool", "flizz", "ibow", "igear", "iglidur", "igubal", "kineKIT", "manus", "motion plastics", "pikchain", "plastics for longer life", "readychain", "readycable", "ReBeL", "speedigus", "triflex", "robolink", "xirodur", and "xiros" are legally protected trademarks of the igus® GmbH/ Cologne in the Federal Republic of Germany and where applicable in some foreign countries.

igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsibushi, NUM,Parker, Bosch Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mention in this website. The products offered by igus® are those of igus® GmbH

igus inc headquarters is located at 257 Ferris Ave, Rumford, RI 02916. igus enjoyneering center is located at 2055 Franklin Rd, Bloomfield Twp, MI 48302