Inquiry / Contact
igus® inc.

PO BOX 14349

East Providence

RI 02914

+1 800 521 2747
+1 401 438 7270

igus® robot control software for gantry and delta robots and robot arms

Modular control and software

This set enables you to control a robolink® D robot arm, a drylin® linear robot or a delta robot. With the corresponding software, you can programme and move the robot via a graphical user interface.
 
Features:

  • Modular, control system based on top-hat (DIN) rail, easy to extend
  • Smooth motion with 1/256 microstepping
  • Energy saving operation with adaptive current control: Trinamics StallGuard2 and CoolStep Technologies
  • Intuitive control and programming environment with interactive 3D user interface
  • Programming commands like Joint, Linear, If-Then-Else, DigitalOut, Loop ...
  • Interface to remote computer via TCP/IP
  • ROS packages are available
  • Options like control cabinet, pneumatic gripper etc. are available

Request robot control software
igus® Robot Control system

Contents:

  • DIN rail module support
  • Top-hat (DIN) rail module stepper
  • Top-hat (DIN) rail module digital-IO
  • Connectors and cables (CAN, supply, motor connectors ...)
  • igus® Robot Control software for Windows
  • Documentation
     

Components that are necessary for operation, but not included:

  • igus® robolink D robot arm
  • Windows 10 PC/laptop
  • 24V power supply (please see our control cabinet with integrated power supply)
  • Gripper (please see the gripper set)
  • Safety components

 


Software for programming: Available for free

  • 3D Surface
  • Intuitive operator control
  • Axis linear movements
  • Connection via Ethernet
  • Easy-to-maintain DIN rail modules
  • Control system for 4, 5, 6-axis robot arms
  • Control system for 3, 4-axis linear robots
  • Control system for delta robot
Scope of supply: igus® Robot Control system and software, 24 V power supply unit, connecting cable.

Also necessary: Windows PC, power supply unit, gripper, safety-relevant components.

Robot programming with igus Robot Control

Tech up

Tech up

  • First robotics control software by igus
  • Programming and integration of robots for everyone
  • Available in control cabinet or on top-hat (DIN) rail assembly
  • For , and

Cost down

Cost down

  • Try our programming software for free online before purchase
  • Digital Twin feature
  • Simple intuitive operation even for non-system integrators
  • Save integration effort; order complete bundle including grippers and vision components via robotics platform RBTX


3 steps, 3 minutes, control robots

Steps irc

Step 1: selecting the kinematics

Select your required robot application.

Connect_Robot

Step 2: connecting the robot

Connect the physical robot to the software by connecting the hardware, resetting the errors and activating the motors.  

Reference

Step 3: referencing the robot

Only after referencing the robot is it possible to execute programmed, Cartesian movements. 

Robots_ready to operate

GO! Your robot is ready to operate

The robot can now be controlled via the Windows PC or handheld with the display as control element.

Downloads

Operating instructions igus® Robot Control
Operating instructions igus® Robot Control

Application Assistance

For further questions or product information, please contact:

Photo
Kristen Crowell

Low Cost Automation Specialist

Email

Customer Service:

Monday to Friday from 8 am - 5 pm

Online:

24h