Accessories for Cable Carriers

Number of products: 17

Strain relief elements

Strain relief clamps, tiewrap plates and modular plug-in strain relief elements.
Upon request
Shop now

Guide troughs for long travels

From the lightweight and universally deployable "Super Alu" guide trough through to the simple and cost-effective snap-in trough.
Upon request
Shop now

isense smart plastics

  • Energy chains that recognise their own need for maintenance
  • More efficient and more economic organisation of maintenance and repair work on your machines
  • Predictable replacement date during operations (predictive maintenance) 
Upon request
Shop now

Assembly tools for energy chains

Simple opening and closing of chain links and big time savings in assembly.
from 40.39 USD/Pc.
13 variants ready for shipping:
2 variants within 2 working days
Shop now

e-rib: corrugated tube reinforcement

The reinforcement for existing corrugated tube systems.  Easily retrofittable, little installation space required and stability against unwanted sideways movement.
from 2.37 USD/Pc.
4 variants ready for shipping:
1 variants within 2 working days
2 variants within 2 working days
Shop now

Trough clip

Energy supply for static cables. Trough clip, guides cable along the guide trough
from 3.79 USD/Pc.
1 variants ready for shipping:
1 variants within 12 working days
Shop now

Chain opener for the E2/000

  • Reduce the assembly time to open the chain from 33 sec. to 2 sec. (Tested series 2700.07)
  • For E2/000 product range (2400/2500, 2600/2700, 3400/3500)
  • Open and close a long piece of e-chain® in one go
from 140.69 USD/Pc.
4 variants ready for shipping:
2 variants within 12 working days
Shop now

Systems E2/000 | Interior separation, unassembled separators

  • Increase cable service life
from 0.39 USD/Pc.
4 variants ready for shipping:
2 variants within 24 hours
1 variants within 2 working days
Shop now

Office e-chain OCR | Mounting brackets

  • Simply attach with block magnets
  • Diameter ø 35mm
  • Complete set includes:
    • Moving end OCR.500.1
    • Fixed end OCR.500.2
from 17.99 USD/Pc.
Shop now

Office e-chain ZF14 | Mounting brackets, plastic, one-piece

  • Width index 38mm
  • A: 51.6mm
  • B: 50mm
from 5.97 USD/Pc.
1 variants ready for shipping:
1 variants within 2 working days
Shop now

Chain opener for the E2.1 system

  • Opening of long e-chain sections in one go
  • Opening time reduced by a factor of 16 (from 33 to 2 seconds for a 1 m piece)
  • Versatile assembly tools for the E2.1 series
  • Less force is needed if these tools are used
  • Fast Return on Investment
Upon request
7 variants ready for shipping:
3 variants within 12 working days
Shop now

chainfix clamps for pneumatic hoses CFX12.X.P | With pneumatic double troughs | Cable diameter 04mm/08mm

  • For hose diameters 4 and 8mm
  • High holding force due to "all-round" grip
  • The cross section of pneumatic hoses is fully retained
  • No crushing of the hoses, and therefore no loss of hose length
  • Good price-performance ratio
Upon request
16 variants ready for shipping:
2 variants within 2 working days
Shop now

chainfix clamps for pneumatic hoses CFX16.X.P | With pneumatic double troughs | Cable diameter 06mm / 10mm / 12mm

  • For hose diameters 4 and 8mm
  • High holding force due to "all-round" grip
  • The cross section of pneumatic hoses is fully retained
  • No crushing of the hoses, and therefore no loss of hose length
  • Good price-performance ratio
Upon request
26 variants ready for shipping:
1 variants within 24 hours
2 variants within 2 working days
Shop now

Steel support tray for energy chains

Simple one-piece steel support trays for the energy chain's lower run according to your requirements and specifications.
  • Noise reducing and low abrasion, safe guidance
  • Simple design: easy mounting to all types of profiles and wall brackets
  • Lightweight material: available in the colour of your choice
  • Available in two types and four versions as a modular system
from 123.49 USD/Pc.
32 variants ready for shipping:
1 variants within 24 hours
1 variants within 2 working days
Shop now

Super aluminium support tray for energy chains

The aluminium support tray serves to support the energy chain's lower run.
  • Noise-reducing: rubber silencer profile optional
  • Simple connection: optimised plastic fixed end module
  • Wear-reducing: glide strips protect from wear on the sides
  • Easy installation: with standard bottom clamps, basic version
  • Corrosion-resistant: seawater-resistant aluminium profile
from 83.79 USD/Pc.
2 variants ready for shipping:
2 variants within 24 hours
Shop now

Application Assistance

Photo
Dan Thompson

Product Manager

Email

Customer Service:

Monday to Friday from 8 am - 8 pm

Online:

24h


The terms "igus", "Apiro", "chainflex", "CFRIP", "conprotect", "CTD", "drylin", "dry-tech", "dryspin", "easy chain", "e-chain", "e-chain systems", "e-ketten", "e-kettensysteme", "e-skin", "e-spool", "flizz", "ibow", "igear", "iglidur", "igubal", "kineKIT", "manus", "motion plastics", "pikchain", "plastics for longer life", "readychain", "readycable", "ReBeL", "speedigus", "triflex", "robolink", "xirodur", and "xiros" are legally protected trademarks of the igus® GmbH/ Cologne in the Federal Republic of Germany and where applicable in some foreign countries.

igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsibushi, NUM,Parker, Bosch Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mention in this website. The products offered by igus® are those of igus® GmbH

igus inc headquarters is located at 257 Ferris Ave, Rumford, RI 02916. igus enjoyneering center is located at 2055 Franklin Rd, Bloomfield Twp, MI 48302