chainfix clamps for pneumatic hoses CFX12.X.P | With pneumatic double troughs

Installation & Inspection Services - Learn More

Explore our robotics marketplace

Help us Improve - Give us Your Feedback

myigus

Shopping Cart

(0)

Inquiry / Contact

igus® inc.

PO BOX 14349

East Providence

RI 02914

+1 800 521 2747

+1 401 438 7270

Contact an expert

Request a quote

US(EN)

chainfix clamps for pneumatic hoses CFX12.X.P | With pneumatic double troughs | Cable diameter 04mm/08mm

For hose diameters 4 and 8mm
High holding force due to "all-round" grip
The cross section of pneumatic hoses is fully retained
No crushing of the hoses, and therefore no loss of hose length
Good price-performance ratio

Product description
Technical data

Product description

Clamp hoses without squeezing
A new pneumatic clamp reliably holds hoses in place without squeezing them and thus reducing the cross section. With a new clamp, the cross section of pneumatic hoses is fully retained. At the same time, the hoses are held securely. Due to high sides, the inserts generate a high holding force for pneumatic hoses in the energy chain and prevent them from being crushed.Tech up:

High holding force due to "all-round" grip
The cross section of pneumatic hoses is fully retained
Increased holding strength
No crushing of the hoses, and therefore no loss of hose length
Coloured identification markings (inserts are blue)

Reduce costs:

Good price-performance ratio
Fast assembly without checking the tightening torque
Protection of the pneumatic hoses against crushing and damage

Tested standard clamps vs. pneumatic clamp: Tests at our customer Schwäbische Werkzeugmaschinen

Advantages of igus pneumatic clamps

No crushing of the hoses after strain relief thanks to CFX clamps with pneumatic inserts
Adjusting the tightening force is dispensed with by defined tightening on the block

Disadvantages of standard clamps on the market