Change Language :

Assembly Instructions for energy chain System E4/light

Assembling energy chains and E-Tubes

System E4/light Assembly
System E4/light Assembly

Position at one side...

Position at one side

System E4/light Assembly
System E4/light Assembly

...and snap in

Snap in

System E4/light Assembly
System E4/light Assembly

Position opposite side,press together and snap in

Position opposite side, press together and snap in

System E4/light Assembly
System E4/light Assembly

Assemble crossbars - Push downand snap in by using a screwdriver

Assemble crossbars - Push down and snap in by using a screwdriver

System E4/light Montage
System E4/light Montage

Assemble clips (energy chains with crossbarsevery other link) - Push down and snap in

Assemble clips (energy chains with crossbars every other link) - Push down and snap in

System E4/light Assembly
System E4/light Assembly

Assemble E-Tube lids/bottoms - Attachto the connector at an angle - Snap in

Assemble E-Tube lids/bottoms - Attach to the connector at an angle - Snap in

Separating energy chains and E-Tubes

System E4/light Assembly
System E4/light Assembly

Remove crossbars, clips, and lids on two adjacent chain links. Guide the screwdriverinto the slot between side links

Remove crossbars, clips, and lids on two adjacent chain links. Guide the screwdriver into the slot between side links

System E4/light Assembly
System E4/light Assembly

and release it by levering it and separate the energy chain

Release it by levering it and separate the energy chain

Opening energy chains

System E4/light Assembly
System E4/light Assembly

Remove crossbars - Insert screwdriver intothe slot, push down, release by lever action

Remove crossbars - Insert screwdriver into the slot, push down, release by lever action

System E4/light Assembly
System E4/light Assembly

Remove clips - Insert screwdriver into theslot and push down, release by lever action

emove clips - Insert screwdriver into the slot and push down, release by lever action

Opening E-Tube

System E4/light Assembly
System E4/light Assembly

Remove lids/bottoms - Insert screwdriverinto the slot, release by lever action

Remove lids/bottoms - Insert screwdriver into the slot, release by lever action

System E4/light Montage
System E4/light Montage

Release only one side to swivel the lid

Release only one side to swivel the lid

Overview of Assembly Instructions for igus® e-chains®

  • Small e-chains®
  • Medium e-chains®
  • Large e-chains®
  • Multi-axis e-chains®
  • Low noise e-chains®
  • Special e-chains®

    • Contact Us

    Questions or product information? Please contact:

    Dan Thompson
    Dan Thompson

    Senior Product Manager

    +1 800 521 2747Contact an Expert

    Customer Service

    Customer Service:
    Phone: Monday to Friday from 8 am - 8 pm
    LiveChat: 24 hours

    Book a Call
    Book an Appointment with a Product Expert