Change Language :

Assembly Instructions for energy chain System E4/00

Assembling energy chains and E-Tubes

System E4/00 Assembly
System E4/00 Assembly

Line up two inner side links, side by side.Attach an outer side link between

Line up two inner side links, side by side. Attach an outer side link between

System E4/00 Assembly
System E4/00 Assembly

Assemble crossbars - Push downand snap in by using a screwdriver

Assemble crossbars - Push down and snap in by using a screwdriver

System E4/00 Assembly
System E4/00 Assembly

Assemble clips (energy chains with crossbarsevery other link) - Push down and snap in

Assemble clips (energy chains with crossbars every other link) - Push down and snap in

System E4/00 Assembly
System E4/00 Assembly

Assemble E-Tube lids/bottoms - Attachto the connector at an angle - Snap in

Assemble E-Tube lids/bottoms - Attach to the connector at an angle - Snap in

Separating energy chains and E-Tubes

System E4/00 Assembly
System E4/00 Assembly

Remove crossbars, clips, lids andbottoms at the outer links...

Remove crossbars, clips, lids and bottoms at the outer links...


System E4/00 Assembly
System E4/00 Assembly

...guide the screwdriver into the slot betweenside links and release it by levering ...

...guide the screwdriver into the slot between side links and release it by levering ...

System E4/00 Assembly
System E4/00 Assembly

...remove the outer links to the side...

...remove the outer links to the side...

System E4/00 Assembly
System E4/00 Assembly

...and separate the energy chain

...and separate the energy chain

Opening energy chains

opening energy chains by first removing crossbars
opening energy chains by first removing crossbars

Remove crossbars - Insert screwdriver into the slot, push down, release by lever action

opening energy chains by removing clips
opening energy chains by removing clips

Remove clips - Insert screwdriver into the slot and push down, release by lever action

System E4/00 Assembly
System E4/00 Assembly

Remove lids/bottoms - Insert screwdriverinto the slot, release by lever action

Remove lids/bottoms - Insert screwdriver into the slot, release by lever action

System E4/00 Montage
System E4/00 Montage

Release only one side to swivel the lid

Release only one side to swivel the lid

Overview of Assembly Instructions for igus® e-chains®

  • Small e-chains®
  • Medium e-chains®
  • Large e-chains®
  • Multi-axis e-chains®
  • Low noise e-chains®
  • Special e-chains®

    • Contact Us

    Questions or product information? Please contact:

    Dan Thompson
    Dan Thompson

    Senior Product Manager

    +1 800 521 2747Contact an Expert

    Customer Service

    Customer Service:
    Phone: Monday to Friday from 8 am - 8 pm
    LiveChat: 24 hours

    Book a Call
    Book an Appointment with a Product Expert