Plain bearings for heavy loads in lifting tables

Storing high loads lubrication-free

Lift tables may not be the most impressive, but they are indispensable systems in material handling. They are used wherever loads need to be lifted to a desired height. With high load capacities of sometimes several tonnes and high lifting frequencies in multi-shift operation, the storage points are exposed to high loads. To ensure that they work reliably, the metallic bearings usually used must be lubricated regularly, especially if they are exposed to the weather outdoors. With iglidur® bearings made of high-performance polymers, you can increase the service life of your lift tables and reduce the costs associated with maintenance.

Advantages of igus products:

No maintenance thanks to dry operation
No corrosion, suitable for outdoor use
Resistant to surface pressures of up to 200 MPa
Resistant to impact and edge loads

Lifting table with highlighted bearing points

Suitable products

iglidur plain bearing Q2 with and without flange

Cylinder bearing

iglidur® plain bearing Q2
The durable high load bearing

Wear-resistant and dimensionally stable at high loads
Good price-performance ratio

Learn more

Scissors-type joint

iglidur® G and igutex® bearing
Economical all-round bearing and high-load bearing

High wear resistance
Insensitive to dirt
Friction-optimised

Learn more

Your component in the shape, quantity and material of your choice

Individual solutions are just as much a part of the igus® programme as standard parts. Our experts customise the choice of manufacturing process and component material precisely to your requirements. The right material is selected for you from a wide range of wear-resistant and maintenance-free high-performance polymers.

Find out more now and ask for the special part

Successfully in use with our customers

Model of a lifting table from the Spanish company Porbisa

Maintenance-free after replacement of bronze bearings
In the galvanised lift tables from Porbisa, iglide® bearings replace the bronze bearings previously used. Their installation is quick, easy and clean. The effort and costs for lubrication during assembly and subsequent maintenance are eliminated.

Lifting table of the company Advanced Handling

Longer service life, longer service life
In the lifting mechanism of the scissor lift tables, the British company Advanced Handling was using various metallic bearings that were frequently worn and had to be permanently lubricated. After switching to iglide®, the lubrication effort and the wear of the bearings has been reduced drastically.

Lifting table from Innovative Hebe Technik GmbH

Push chain drive with maintenance-free bearings
Innovative Hebe Technik GmbH relies on the use of push mast drive chains for its lift tables. iglide® Q2 bearings ensure a maintenance-free and virtually wear-free bearing that can also withstand high surface pressures without any problems.