Inquiry / Contact
igus® inc.

PO BOX 14349

East Providence

RI 02914

+1 800 521 2747
+1 401 438 7270
US(EN)

CFROBOT8.PLUS.022/ 049/050 robot cable

CFROBOT8.PLUS

... 360 degrees now also for CAN bus and Ethernet up to CAT6A ...


It is impossible to imagine any area of industry without robots, and with them the demand for intelligent actuators is also increasing. Twistable bus cables are becoming an ever greater necessity due to the development associated with Industry 4.0 of transporting an increasing amount of data of a process by means of a bus system. In the range of very large torsion angles, we can now present bus solutions up to +/- 360°/m even for CAN bus and Ethernet up to CAT6A, as 10GBit at 500MHz.
 
Tech up

Tech up

  • Torsion angle doubled to 360°/m
  • 23.5% thinner diameter
Tech up

Cost down

  • Extended service life thanks to larger torsion angle
  • Calculate the service life of the cable online: igus.eu/chainflexlife
Proof

Proof

  • Test (No. 4888) CFROBOT8.PLUS.045 with more than 15 million cycles. Strokes successfully tested with full data transmission
Sustainability

Sustainability

  • igus® has been an investor in Mura Technology from the very beginning and is advancing chemical recycling. From plastic waste to crude oil in 20 minutes: igus.eu/hydroprs



Application Assistance

For further questions or product information, please contact:

Customer Service:

Monday to Friday from 8 am - 8 pm

Online:

24h


The terms "igus", "Apiro", "chainflex", "CFRIP", "conprotect", "CTD", "drylin", "dry-tech", "dryspin", "easy chain", "e-chain", "e-chain systems", "e-ketten", "e-kettensysteme", "e-skin", "e-spool", "flizz", "ibow", "igear", "iglidur", "igubal", "kineKIT", "manus", "motion plastics", "pikchain", "plastics for longer life", "readychain", "readycable", "ReBeL", "speedigus", "triflex", "robolink", "xirodur", and "xiros" are legally protected trademarks of the igus® GmbH/ Cologne in the Federal Republic of Germany and where applicable in some foreign countries.

igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsibushi, NUM,Parker, Bosch Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mention in this website. The products offered by igus® are those of igus® GmbH

igus inc headquarters is located at 257 Ferris Ave, Rumford, RI 02916. igus enjoyneering center is located at 2055 Franklin Rd, Bloomfield Twp, MI 48302