e-skin® flat support chain SKF.S

Product presentation: e-skin flat with support chain

The SKF.S e-skin flat with support chain is an addition to the e-skin flat line of products. This cleanroom cable carrier can be added easily, allowing unsupported travels and can be combined with the SKF12C and SKF15C e-skin® flat series.

Part No.	Outer width	Outer height	Bend radius
SKF.S.08	8mm	8mm	40 / 70 / 100mm
NEW: SKF.S.10	10mm	10mm	125mm

To the e-skin configurator

NEW: SKF.S.10.125.01.0 e-skin® flat with support chain

The new e-skin® flat with support chain enables longer travels of up to 5 meters with the cleanroom-optimized e-skin® flat system. The new larger cable carrier is guided in the POD SKF15C series and can be integrated into the existing mounting bracket structure.

SKF.S.10.125.01.0 support chain for the e-skin flat

Compare the SKF.S.08 and the SKF.S.10

Tech up

Suitable for clean rooms according to IPA cleanroom Class 1, also for the three-layered e-skin flat
Available in two versions: closed and openable with a special closure system
Optionally available with support e-chain for longer unsupported lengths
Can be combined with SKF12C and SKF15
Stackable, width-variable mounting brackets
Modular and compact design
Defined bend radius for applications with e-skin flat
Profile for cleanroom applications with compact installation spaces

Cost down

Monitoring of the sag via ultrasonic measurement with replacement recommendation - optional with the i.Cee EC.S additional module
Individual cables can be changed quickly without replacing the entire energy supply
Can be shortened or widened
No minimum order quantity
Flexible standard modular system, no special production
IPA ISO Class 1 chainflex cables up to 4 years guaranteed

Proof

IPA cleanroom class 1 for the three-layered e-skin flat: Material/stranded structure* tested by IPA according to ISO 14644-14, report IG 2107-1242

*The following cables are listed in the certificate: CFCLEAN3.01.05.02 and CAPU.A.06.0 - Further tests are at present are not scheduled.

Sustainability

99% material savings possible, as you can replace a cable without having to replace the entire system
Have your energy chain recycled at the end of its life cycle with the igus chainge recycling program .
igus has been an investor in Mura Technology from the beginning and is helping to advance chemical recycling. From plastic waste to crude oil in 20 minutes:

e-skin flat single pods

Freely fillable cable guidance system. Exceptionally compact design. Modular design using interconnectable profiles.

More e-skin series

Securely and abrasion-resistant cable guidance in cleanrooms.

Go to e-skin overview

Cleanroom energy chains

Discover more energy chains suitable for ISO class 1 cleanroom applications here.

Cleanroom energy chains

e-skin flat application example

Linear system with air bearings

igus e-skin flat SKF12.4.03.1.01 is used in a linear system with air bearings. The e-skin flat has no minimum order quantity, shows almost no visible wear and tear and can be implemented in the smallest installation space.