Micro Flizz® - A system for the safe guidance of energy, data and air
With the smallest of e-chains® master long travels – without any interruptions.
- Compact, low noise, cost-saving overall system for a secure guidance of energy, data and air
- Maintenance-free alternative to power line
- The e-chain® is guided in a special slot, no gliding against each other
- Optional control with stationary control cabinet
- Accelerations up to 164 ft/s2 and operating speeds up to 20 ft/s
- Quick assembly facilitated with pre-assembled systems in modular designs
- Low space requirements
- Also available as pre-assembled versions
- Ball-bearing mounted carriage ensures smooth operation
- Also with EX tested e-chain® available
- (on request)
- Material rail MF06/MF08: aluminium anodized,
- material rail MF10: black anodized
- Travel up to 328 ft
- iF-Design Award
Delivery program MF06
| Order no. | Bi [mm] |
Ba [mm] |
hi [mm] |
ha [mm] |
R [mm] |
||
|---|---|---|---|---|---|---|---|
| MF-06-10-018 | 0.39 | 0.75 | 0.43 | 0.67 | Upon request |
More about selected part:
| further dimensions | |
|---|---|
| Installation height for the complete system: | 108,48 mm |
| Installation width of the complete system: | 29,5 mm |
| Recommended length of the trough sections: | 2.0 m, 3.0 m and 6.0 m - Material: Aluminum die-casting |
| Maximum cable/hose outer diameter: | Ø 8 mm |
Delivery program MF08
| Order no. | Bi [mm] |
Ba [mm] |
hi [mm] |
ha [mm] |
R [mm] |
||
|---|---|---|---|---|---|---|---|
| MF-08-18-035 | 0.71 | 1.14 | 0.51 | 0.83 | Upon request |
More about selected part:
| further dimensions | |
|---|---|
| Installation height for the complete system: | 161 mm |
| Installation width of the complete system: | 40,5 mm |
| Recommended length of the trough sections: | 2,0 m, 3,0 m and 6,0 m - Material: Aluminum die-casting |
| Maximum cable/hose outer diameter: | Ø 9,5 mm |
Delivery program MF10
| Order no. | Bi [mm] |
Ba [mm] |
hi [mm] |
ha [mm] |
R [mm] |
||
|---|---|---|---|---|---|---|---|
| MF-10-50-075 | 1.97 | 2.48 | 0.79 | 1.08 | Upon request |
More about selected part:
| further dimensions | |
|---|---|
| Installation height for the complete system: | 275 mm |
| Installation width of the complete system: | 107,6 mm |
| Recommended length of the trough sections: | Standard trough pieces 2 m length, anodised aluminium extruded profile |
| Maximum cable/hose outer diameter: | Ø 16 mm |
Micro flizz® technical facts
1
Separate upper and lower runs on the flizz® e-chain®,
hence less friction and reduced power consumption in motion
"Wings" firmly hold the e-chain® in the guide channel
3Plastic spring enables the e-chain® to roll softy in the flizz® channel, thereby significantly reducing the noise
4Integrated strain relief in the carriage for secure fixing of the cables
5Universal connection through three T-slots possible
6The e-chain® is fastened at the moving end via the moving end carriage
7Usable in the counter direction, which means double filling or two separate travels is possible
Separate upper and lower runs: wings fold in in the radius. e-chain® glides freely
Fold out in the extended condition, the e-chain® firmly holds in the Micro flizz® guide channel
Energy, data, pneumatics in the smallest space. chainflex® cables are optimally designed for this application
Polymer spring dampens the rolling noise of the e-chain® in the flizz® channel - thus minimizes noise emission
Micro flizz® accessories: Moving end
connector for compressed air coupling
connector for compressed air coupling
Potential application area for the micro flizz®:
Storage and retrieval units, indoor cranes, etc.
Micro flizz® Series MF06
Micro flizz® Series MF08
Micro flizz® Series MF10
Order example - end infeed
Micro flizz® as an end infeed version with a total length of 5000 mm, distributed over 2 channels of 2000 mm each and 1 channel with a residual length of 1000 mm
Bi = e-chains® internal width
R = bending radius [mm]
n= number of channel pieces
S = travel distance = L- 300[mm]
F = field length [mm]
L = total length [mm]
X = remaining length [mm]
R = bending radius [mm]
n= number of channel pieces
S = travel distance = L- 300[mm]
F = field length [mm]
L = total length [mm]
X = remaining length [mm]
MF.06.10.018.5000/2000 Version MF06
MF.08.18.035.5000/2000 Version MF08
MF.10.50.075.5000/2000 Version MF08
MF = Micro flizz® End infeed
06./08.10 = Version(Series)
10./18.50 = e-chains® Inner width
018./035./075 = Bending radius [mm]
5000/2000 = total length / field length [mm]
MF.08.18.035.5000/2000 Version MF08
MF.10.50.075.5000/2000 Version MF08
MF = Micro flizz® End infeed
06./08.10 = Version(Series)
10./18.50 = e-chains® Inner width
018./035./075 = Bending radius [mm]
5000/2000 = total length / field length [mm]
This is how you work out the number of channel sections required (n):
n=L/F
Then round the result down.
1 = Fixed end
2 = Moving end (-carriage)
F = Recommended channel length
Bi = Series 06: 10 mm / Series 08: 18 mm / Series 10: 50 mm
hi = Series 06: 11mm / Series 08: 13 mm / Series 10: 20 mm
n=L/F
Then round the result down.
1 = Fixed end
2 = Moving end (-carriage)
F = Recommended channel length
Bi = Series 06: 10 mm / Series 08: 18 mm / Series 10: 50 mm
hi = Series 06: 11mm / Series 08: 13 mm / Series 10: 20 mm
Order example - 2 carriages running in the opposite direction
Micro flizz® assembled with 2 carriages in opposite directions - total length 10,000 mm, distributed over 2 channels of 3,000 mm each, the infeed module (200 mm) and 2 channel each with a residual length of 1,900 mm.
Bi = e-chains® internal width
R = bending radius [mm]
n = number of channel pieces
S = travel distance = L- 300[mm]
F = field length [mm]
L = total length [mm]
X = remaining length [mm]
R = bending radius [mm]
n = number of channel pieces
S = travel distance = L- 300[mm]
F = field length [mm]
L = total length [mm]
X = remaining length [mm]
MFG2.06.10.018.5000/2000 Version MF06
MFG2.08.18.035.5000/2000 Version MF08
MFG2.10.50.075.5000/2000 Version MF08
MFG2 = micro flizz® 2 carriages running in opposite directions
06./08./10. = Version (Series)
10./18./50. = e-chain® inner widths
018./035./075. = Bending radius [mm]
5000/2000 = Total length/field length [mm]
MFG2.08.18.035.5000/2000 Version MF08
MFG2.10.50.075.5000/2000 Version MF08
MFG2 = micro flizz® 2 carriages running in opposite directions
06./08./10. = Version (Series)
10./18./50. = e-chain® inner widths
018./035./075. = Bending radius [mm]
5000/2000 = Total length/field length [mm]
This is how you work out the number of channel sections required (n):
n=2*(L-200)/(2*F)
Then round the result down.
1 = Fixed end
2 = Moving end (-carriage)
F = Recommended channel length
Bi = Series 06: 10 mm / Series 08: 18 mm / Series 10: 50mm
hi = Series 06: 11mm / Series 08: 13 mm / Series 10: 20 mm
n=2*(L-200)/(2*F)
Then round the result down.
1 = Fixed end
2 = Moving end (-carriage)
F = Recommended channel length
Bi = Series 06: 10 mm / Series 08: 18 mm / Series 10: 50mm
hi = Series 06: 11mm / Series 08: 13 mm / Series 10: 20 mm
Ready to ship within 12 working days
