Inquiry / Contact
igus® inc.

PO BOX 14349

East Providence

RI 02914

+1 800 521 2747
+1 401 438 7270

Assembly Instructions for energy chain System E4/00

Assembling energy chains and E-Tubes

System E4/00 Assembly

Line up two inner side links, side by side. Attach an outer side link between

 
System E4/00 Assembly

Assemble crossbars - Push down and snap in by using a screwdriver

 
System E4/00 Assembly

Assemble clips (energy chains with crossbars every other link) - Push down and snap in

 
System E4/00 Assembly

Assemble E-Tube lids/bottoms - Attach to the connector at an angle - Snap in

 

Separating energy chains and E-Tubes

System E4/00 Assembly

Remove crossbars, clips, lids and bottoms at the outer links...

 
System E4/00 Assembly

...guide the screwdriver into the slot between side links and release it by levering ...

 
System E4/00 Assembly

...remove the outer links to the side...

 
System E4/00 Assembly

...and separate the energy chain

 

Opening energy chains

System E4/00 Assembly

Remove crossbars - Insert screwdriver into the slot, push down, release by lever action

 
System E4/00 Assembly

Remove clips - Insert screwdriver into the slot and push down, release by lever action

 

Opening E-Tube

System E4/00 Assembly

Remove lids/bottoms - Insert screwdriver into the slot, release by lever action

 
System E4/00 Montage

Release only one side to swivel the lid

 

System E4 - Installation - Video

 

Still faster assembly with optional separator with quick release fastener