New slewing ring bearing products

The iglide® PRT-04 with precise locking expands the PRT-04 series with a version for applications that need repeatable rotary positioning at clearly defined points. Its integrated locking mechanism engages in 90° increments and provides clearance-free fixation of the rotary movement, making it a strong fit for fixtures, adjustment systems, operator interfaces, and automation equipment.

Because it is part of the modular PRT-04 system, this bearing can be integrated into existing designs and paired with related extensions or alternatives within the range. The locking bolt offers a maximum holding force of 700 N, while replaceable sliding elements help support customization and longer service life. For applications that need adjustable stopping points instead of indexed locking, this section can naturally link to the PRT-04 with angle limiter over 360° or other modular PRT-04 slewing ring bearings.

The iglide® PRT-05 Compact expands the PRT-05 series with an exceptionally space-saving slewing ring bearing for designs with limited installation space. Its reduced outer ring helps it fit in mounting situations where standard slewing ring bearings may not work, which makes it especially useful in compact machinery, automation equipment, and other tight rotary layouts.

The PRT-05-94-PC-CP-AL combines a compact 122 mm diameter with a lightweight structure of just 80 g, while also serving as a more cost-effective option within the series. Made from at least 75% regranulate and designed for grease-free operation, it supports low maintenance use and more material-conscious design. This section can also point users toward other compact rotary options such as the PRT-04 compact version or to the broader PRT-05 series for larger installation sizes.

The iglide® PRT-05-94-PC expands the proven low cost PRT-05 series with a larger installation size for applications that need a larger diameter and higher load support. Made entirely from plastic, it combines lightweight construction with a simplified two-component design, making it a practical option for rotary assemblies that need durability without unnecessary complexity.

Produced from at least 75% regranulate, this slewing ring bearing also supports more resource-conscious equipment design. igus testing highlights strong load capacity, especially under axial load support, making it a strong fit for panels, control panels, display positioning, and other larger rotary applications where robustness and low weight both matter. This section can also link to the PRT-05 Compact for tighter spaces or to the PRT configurator for application-based selection.

The iglide® PRT-02 with integrated spacer ring is designed for simpler, more reliable installation on flat mounting surfaces. Because the spacer ring is built in, the slewing ring bearing can be mounted flush without added undercuts or cutouts, which helps reduce machining effort and speeds up assembly.

Based on the proven PRT-04 spacer ring design, this version brings the same grease-free, low-maintenance rotary performance into a more compact format. It is a strong fit for applications that need easier integration, clean operation, and flexible installation across a range of sizes.

The iglide® PRT-02-20-AL-CP is a compact slewing ring bearing for designs where installation space is limited but load capacity still matters. As a lower-cost alternative to the PRT-04-CP, it gives engineers a lighter, space-saving rotary option without giving up dependable performance.

Its compact design, grease-free operation, and reduced material use make it a strong choice for mechanical engineering, automation, and other small equipment layouts where space savings and low maintenance are both priorities.

The PRT-05-15-PC-TS-360 adds an adjustable angle stop to the all-plastic PRT-05 platform. Made from injection-molded components, it offers a lightweight, cost-effective design that is easy to assemble and well suited for simple rotary applications with defined motion limits.

The integrated stop enables controlled rotary movement and can be customized on request for application-specific positioning needs. With iglide® P4 and iglide® M260 material pairings selected based on test performance, this version is built to deliver long service life in a compact, low-maintenance format.

The PRT-04-CP is the compact version of the high-performance PRT-04 and is built for smaller installations where space, weight, and cost all matter. Compared to the PRT-01, it is 60% lighter, offers 50% more space savings, and is 20% more cost-effective, making it a strong option for more compact rotary designs.

With universal iglide® J sliding elements and access to the broader PRT-04 modular system, it gives users a smaller-format slewing ring bearing that still fits naturally into larger platform planning and expansion.

The PRT-04-TS-360 is designed for applications that need individually adjustable stop positions to limit rotary movement at defined points. Its stop-dog design can be adjusted quickly, making it easier to tailor the slewing ring bearing to specific motion requirements.

A key advantage of this version is that the stop can be implemented over 360° and extended up to 720° on request, giving engineers more flexibility for layouts that need controlled multi-turn motion without a fully free rotation.

This PRT-04 slewing ring bearing with iglide® JPF sliding elements gives users a PTFE-free option within the proven PRT-04 platform. It combines an aluminum housing with a versatile sliding element material for engineers looking to meet specific material requirements without stepping away from the broader PRT system.

As a PTFE-free all-rounder, it is a strong fit for applications that need grease-free rotary motion, modular design flexibility, and a material pairing aligned with changing specification needs.

The PRT-06-100 is built for applications that need a particularly light, flat, and cost-effective slewing ring bearing. Compared to the PRT-04, it is positioned as a more economical option and has an installation height of just 8 mm, which is about half the height of the PRT-04 series.

Available with a stainless steel or aluminum housing and sliding elements made from iglide® J or A181, this version is a strong fit for compact rotary assemblies where a low profile and lower overall cost are key design priorities.