A new tribo-material makes it possible: the crossbars consisting of two injection-moulded components reduce the abrasion of the E6 and E6.1 cleanroom chains even more.
This question came from a big customer in the semiconductor industry: can the abrasion of the E6 cleanroom chain be reduced even more? The answer: yes - with a new guide bar optimised for less abrasion And with a clever "division of labour" between the inner and outer materials.
A new cleanroom material is used for the new interior separation system of the E6 cleanroom chain. Sometimes, it is the details that bring about crucial improvements. A new interior separation system increases the abrasion-resistance of the E6 and E6.1 cleanroom energy chains even more
|Part No.||Suitable for||Width BBB|
|E6.29.1.CR1||Separator suitable for the E6.29/E61.29 ranges||–||Submit an enquiry now|
|E6.35.1.CR1||Separator suitable for the E6.29/E61.35 ranges||–||Submit an enquiry now|
|E6.40.1.CR1||Separator suitable for the E6.29/E61.40 ranges||–||Submit an enquiry now|
|E6.52.1.CR1||Separator suitable for the E6.29/E61.52 ranges||–||Submit an enquiry now|
|2300.BBB. CR1||Shelf suitable for all E6.20-52 ranges||030 - 300 mm||Submit an enquiry now|
Free white paper:
Six-section energy chains. Robust, quiet, low vibration, suitable for cleanrooms and in acc. with ISO Class 1.
The new generation of quietly operating energy chains suitable for cleanrooms Extremely free of vibrations, weight saving of approx. 30% compared to E6 system and ISO Class 1
Further abrasion-resistant energy chains for cleanroom applications according to Class 1 in acc. with EN ISO 14644.
Discover further valuable information on cleanrooms and find out about further cleanroom products.
Company's own cleanroom laboratory according to IPA certification in the igus technical centre. Cleanroom compatibility of chain applications can be quickly tested according to your requirements.