Simplified e-skin® flat mounting bracket

Consistent strain relief for each layer

Extension of the flat cable e-skin® flat accessories:

Simplified strain relief in the mounting bracket. One-piece, continuous element for defined cable diameter ranges per layer. This reduces the number of components in the mounting bracket and enables quick assembly.

[NEW] Two new variable strain reliefs have been added to the e-skin® flat series: SKFC.SR.V25 and SKFC.SR.V10. These new versions are flatter than the previous SKFC.SR.V50 and therefore offer more flexibility in the mounting bracket of the e-skin flat system. Installation of the mounting brackets is made easier by simply cutting them to the required width.

Make a request now

Product range:

Part No. Spacers	Possible cable diameters
SKFC.SP16	4 - 7
SKFC.SP20	8 - 10

Tech up

Simplified ordering process for defined
assemblies for mounting brackets
More flexibility for all e-skin® flat POD sizes

Cost down

Fewer parts in the mounting bracket and faster system assembly

Proof

Certified according to Fraunhofer IPA Cleanroom Class 1. Single-layer (Report IG 2102-1212) and three-layer (Report IG 2107-1242) design, each measured at v = 0.5m/s, a = 1m/s², v = 1m/s, a = 2m/s² and v = 2m/s, a = 4m/s²

Sustainability

Higher production yield due to particle reduction conserving resources

Cleanroom efficiency conveyor e-skin® flat

The flat cable guidance system e-skin® flat consists of individual cable chambers that can be joined together. One or more cables can be fitted into these chambers.

To the e-skin® flat