D3 Motor Drives Commissioning - dryve

This section supports you in commissioning the motor control system from igus®. Here you will find tutorial videos about mechanical and electrical installation as well as parametrisation of the user interface.

Applications Commissioning - Hardware settings Mechanical installation Electrical installation Assistance - Status messages Assistance - Application performance

Applications

With these application videos, you can quickly find out whether one of your applications has already been implemented with igus® motor control systems. But you are also welcome to try them out for your next project.

Commissioning - Hardware settings

For optimum operation in your application, the D3 dryve motor control unit must be configured accordingly using the hardware switches. For quick and effective implementation, you will find the corresponding tutorial video for each setting.

Mechanical installation

The optimum installation method for the motor control unit must be selected depending on the installation situation. The variants available for selection are demonstrated below.

Electrical installation

The electrical connections required may vary greatly depending on the motor type selected and the desired range of functions. For quick and error-free realisation of the electrical installation, you will find the corresponding tutorial video for each setting.

Digital inputs

Assistance - Status messages

The D3 dryve engine control unit can use various self-diagnostic functions to respond to a wide range of problems and provide solutions. The following tutorial videos provide you with detailed additional information on the respective alarm or error.