Inquiry / Contact
igus® inc.
US(EN)
E2 micro e-chains® are very small, one-piece and two-piece (B07/B09) e-chains® with a low weight and therefore ideal for highly dynamic applications. E2 micro e-chains® are stable and available in many versions. igus® also offers numerous accessories and mounting options. "UPGrades" of the snap-open versions are available for many types; they are interchangeable among themselves and can thus be used as, among others, spare parts pack for new installation options.
Typical industrial sectors and applications
 | For the series with this icon, a free chain opener is enclosed. |
Inner height hi: 10 mm
Inner widths Bi: 6 - 50 mm
bending radii R: 10 - 38 mm
Pitch: 20 mm
Inner height hi: 10 mm
Inner widths Bi: 6 - 50 mm
bending radii R: 10 - 38 mm
Pitch: 20 mm
Inner height hi: 10 mm
Inner widths Bi: 6 - 50 mm
bending radii R: 10 - 38 mm
Pitch: 20 mm
Inner height hi: 15 mm
Inner widths Bi: 10 - 50 mm
bending radii R: 28 - 48 mm
Pitch: 20 mm
Inner height hi: 15 mm
Inner widths Bi: 10 - 50 mm
bending radii R: 28 - 48 mm
Pitch: 20 mm
Inner height hi: 15 mm
Inner widths Bi: 10 - 50 mm
bending radii R: 28 - 75 mm
Pitch: 20 mm
Inner height hi: 5 mm
Inner widths Bi: 5 - 10 mm
bending radii R: 10 - 28 mm
Pitch: 10 mm
Inner height hi: 7 mm
Inner widths Bi: 7 - 30 mm
bending radii R: 15 - 48 mm
Pitch: 16,7 mm
Inner height hi: 10,3 mm
Inner widths Bi: 6 - 64 mm
bending radii R: 18 - 38 mm
Pitch: 13 mm
Inner height hi: 10 mm
Inner widths Bi: 6 - 64 mm
bending radii R: 18 - 38 mm
Pitch: 20 mm
Inner height hi: 10,5 mm
Inner widths Bi: 6 - 64 mm
bending radii R: 18 - 38 mm
Pitch: 20 mm
Inner height hi: 15 mm
Inner widths Bi: 10 - 50 mm
bending radii R: 25 - 48 mm
Pitch: 20 mm
Inner height hi: 10,3 mm
Inner widths Bi: 6 - 64 mm
bending radii R: 18 - 38 mm
Pitch: 20 mm
Inner height hi: 14,3 mm
Inner widths Bi: 16 - 40 mm
bending radii R: 28 - 48 mm
Pitch: 20 mm
Inner height hi: 10.9 mm
Inner widths Bi: 10 - 40 mm
bending radii R: 18 - 38 mm
Pitch: 20 mm
Inner height hi: 14,3 mm
Inner widths Bi: 10 - 40 mm
bending radii R: 28 - 48 mm
Pitch: 20 mm
One and two-piece e-chains®, from 5 mm inner height
High torsion resistance
Smallest inner heights and bending radii
Mounting brackets with strain relief optional
Small pitch for silent operation
Cable-friendly interior
Low weight
Large pins for a long service life
Favorable internal/external dimensions ratio
B07/B09 in two parts - Can be folded out in outer radius due to integral hinges
General construction machinery
Models (micro e-chain®),
Automatic doors
Vehicles
Measuring machines
Electronics
Handling systems
Pick and place robot
iF-Design-Award for E2 micro Series 05
Clean room test on request
Special design: Electrically conductive ESD versions on request
UL94-V0 classification for Series 03 and Series 14 (more on request)
42 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, Series 06.10.038.0
You can find the right e-chain® quickly by entering concrete parameters and with the aid of a comparison table.
Joining and separating of the E2 micro e-chain®.
Applications in various industrial sectors.
